Crossfire Invercut 40D, Руководство пользователя

Страница: 7 / 21

6
Plasma Cutter
Operating Instructions and Parts Manual Plasma Cutter
Invercut 40D
Gas Pressure Display
The built-in gas display is used for reading the output gas pressure when cutting.
Gas Pressure Adjustor
It is used for adjusting the gas pressure. The gas pressure can be read from the
gas pressure disp
lay o
n the front panel. Normally, the pressure should be
adjusted between 50-80psi, when 120V,the pressure should be adjusted
between 45-65psi.
Power indicator Light
This light will turn on when the input power cord is plugged into the power supply
and the power switch on the back of the plasma cutter is in the "ON" position.
Work Indicator
When cutting, this light is on to show the unit is on working mode.
Protection indicator Light
When the unit is in thermal overload, is over voltage or lacking voltage, the
indicator will be on and the machine will stop working. When the unit is cooled
down and voltage stabilizes, the unit will return to work automatically.
Low Gas Indicator Light
This light will be on when the gas flow is low.
Ground Cable Connection
Connect the ground cable to the positive (+) receptacle on the front of the plasma
cutter. The ground cable clamp connects to your work piece.
Gas Pressure
Display
Gas Pressure
Adjustor
Grounding Cable
with Clamp
Cutting Torch
Nozzle Electrode
Indicator Lights
Power Switch
Power Cord
Current
Adjustmen