Crossfire CF125 2013 Скачать руководство пользователя страница 6

Страница: 6 / 59

])('[

INTRODUCTION

Congratulations on choosing your Crossfire motorcycle.

Your Crossfire motorcycle was designed as a recreational motorcycle for off-road use only by

a single rider. This motorcycle is ideal for riders with basic experience.

Before riding, take plenty of time to get acquainted with your motorcycle and how it works.

To protect your investment, we urge you to keep your motorcycle well maintained. In

addition to regular maintenance, it is just as important to observe and perform all pre-ride

and periodic checks detailed in this manual. We also recommend that you read this manual

before you begin riding. In this manual you will find safety information, facts, instructions,

helpful tips and illustrations. To make it easy to use, the manual contains a table of contents

at tbe beginning of the manual.

As you read through this manual, you will find information that is preceded by a

Ht•n(lj:jj

symbol. This information is intended to help you avoid damage to your motorcycle and/or

prope1ty around you. This manual covers basic maintenance procedures. A detailed parts

diagram manual is available and it can be purchased separately from Crossfire

otorcycles. The

parts manual will be helpful to those with the mechanical skills and tools required to service

their own motorcycle.

Whenever you ride, tread lightly. By staying on established trails and riding in approved areas,

you will help protect the environment and keep off-road riding areas open for future use.

If you have any questions or you need any special service or repair, remember that your

Crossfire

otorcycles dealer knows your motorcycle best and will be dedicated to your

complete satisfaction. Replacement parts and technical support can be obtained through your

Crossfire

otorcycles dealer. Please be sure to register your motorcycle with Crossfire

otorcycles and report any address changes so that we may contact you in the future concerning

important product infom1ation.

�

OTOS

Name

Bracket Bolts

Cross Bar Bolts

Steering Stem Top Nut

Riser Bolts

Steering Stem Nut

Notes

TORQUE SPECIFICATIONS

])('[

Torque

Notes

N•m

ft•lbs

4.5

3.3

5.4

10.8

14.8

I. Apply oil to threads.

2. Apply loctite 271 liquid to threads.

3. Apply loctite 243 liquid to threads.

4. Apply grease to bolt, NOT threads.

Содержание CF125 2013




























































Результаты поиска

Содержание CF125 2013

Отзывы:

Похожие инструкции для CF125 2013

Бренды по названию

Популярные бренды

Crossfire CF125 2013, Руководство по эксплуатации

Результаты поиска

Содержание CF125 2013

Отзывы:

Похожие инструкции для CF125 2013

Бренды по названию

Популярные бренды