9
away from air inlet and keep good ventilation during work.
5.2.2 There should be at least 1.5m space between any obstacle and air inlet or gas outlet.
5.2.3 Place the machine at flat field in case of any shift the brake wheel should be
locked.
6. Checking Before Started
Check each part accordingly, keep safe environment and notice people before start.
6.1
．
Check gasoline engine oil
6.1.1 Check engine oil dipstick (refer to engine Manual)
6.1.2 Make up engine oil if it’s lower than limit.
Notice:
After long-time running, the engine oil will reduce. Check and avoid engine oil
lack.
6.2
．
Fuel check
Check fuel whether enough before start work. (Take off the sediment of fuel tank
filter sieve periodically)
6.3
．
Oil pipe check
6.4
．
Protection grounding check
Check the protection grounding. The case should be reliably grounding.
6.5
．
Check to make sure no oil leakage
If leaking, please contact us or seller immediately.
6.6
．
Check whether the parts are loose.
Check and make sure not loosen of bolts, nuts and all the fasteners, especially air and acoustic filter.
There should be no circuit broken, short and loose.
6.7
．
Check whether there are foreign objects inside or outside of the machine
6.7.1 Check whether there are tools or waste left inside, and get rid of them.
6.7.2 Check whether there are waste and flammable bodies around acoustic filter.
6.7.3 Check whether there are waste at air inlet and outlet of engine.
6.8
．
Loading Matching
6.8.1 Make sure the capacitance can match the loading, which can make the machine work
properly.
6.8.2 The welding cable diameter should be correct.
7
、
Pre-starting Procedure
7.1. Check engine oil could meet scale every time before operation.
7.2. Check whether fuel is sufficient.
7.3. Turn fuel switch to “ON”.
7.4. Air door position
(1)Switch the air door to ‘close’ position
