CCpilot V700
Revision: 1.0
Technical Manual
2020-09-10
www.crosscontrol.com
5
2.4.
Environmental resistance
The CCpilot V700 product has been designed to manage tough environmental demands. Much
effort has been put into designing and selecting system components to provide a reliable and
robust device.
Thorough testing has been performed in order to ensure compliance to a broad range of
applicable regulatory requirements and to meet user demands of a ruggedized product for
machinery control.
A complete list of standards to which the product has been tested for compliance can be found
in chapters 8.2 and 8.3.
3.
Product overview
This chapter contains illustrations of the CCpilot V700 showing the location of external
connectors, indicators etc. Connectors are described in more detail in chapter 7. Additional
mechanical information can be found in chapter 8.4.
3.1.
Front side view
At the front side of the device there is a 7” display with projected capacitive touch-sensor
(PCAP). There is also a light sensor and an RGB status LED in the front. The light sensor
enables automatic dimming of display and the RGB status LED shows operation modes or fault
indications.
Figure 2: CCpilot V700 front side view
3.2.
Rear side view
The rear side contains the mounting holes for either a fastener in accordance with 1.5” RAM
®
ball mount (RAM-202U) or custom bracket for panel mounting and a GORE-TEX
®
membrane
for ventilation.
Light
RGB status
