Translation of original operating instructions
6
Ignition system
Spark plug
BM6A / L8RTF / L7RTC
Spark plug gap
0.7 mm
Fuel and Lubrication system
Type of carburetor
Diaphragm carburetor
Fuel tank capacity
310 ml
Oil tank capacity
210 ml
Oil feeding system
Automatic pump with adjuster
Weight
Motor unit without fuel and oil
ca. 4.2 kg
Noise and vibration values
Measured sound power level LWA
111.8 db(A)
Guaranteed sound power level LWA (K = 3 dB)
113 db(A)
Measured sound pressure level LpA (K = 3 dB)
104.9 db(A)
Vibration emission value (front handle)
6.254 m/s² / K = 1.5 m/s²
Vibration emission value (rear handle)
6.960 m/s² / K = 1.5 m/s²
Noise emission and vibration information
Environmentally harmful noise emission measured as sound power (LWA) according to EC Directive 2000/14
The recorded volume level for the machine was measured using the original cutting equipment with the highest level. The
difference between the guaranteed and measured sound levels is that the guaranteed sound level also takes into account
a variation in the measurement result and variations between different machines of the same model according to Directive
2000/14/EC
Vibration total values (vector sum of three directions) determined according to EN 60745 (uncertainty K = 1.5 m/s²)
The vibration level determined in accordance with EN 60745 can be used to compare tools with each other and is also
suitable for a preliminary assessment of vibration exposure.
The vibration level represents the main applications of the tool. It may vary if the tool is used for other applications, with
different application tools or insufficient maintenance. This can significantly increase the vibration exposure over the entire
working period.
For an accurate estimation of the vibration exposure, the times when the tool is switched off or running but not actually in
use should also be considered. This can significantly reduce the vibration exposure over the entire working period.
Pay attention to additional safety measures to protect the operator from the effects of vibrations, such as: regular
maintenance of tools, keeping hands warm, organizing work processes.
Saw chain / guide bar
Type of guide bar
OREGON 140SDEA041: 14" / 0,050"
Maximum cutting length
350 mm
Saw chain type
OREGON 91PX052X
Saw chain pitch
3/8" / 9.32 mm
Saw chain gauge
0.050" / 1.47 mm
Number of drive links of the chain
52
Sprocket Number of teeth / pitch
6 x 3/8" (9.32 mm)
Dimensions (without guide bar)
L x D x H
380 x 240 x 270 mm
29