1.2 Technical Characteristics
Technical Specifications continued on page 5...
3116-T71-184 Manual, Rev. B
Page 4
05/16/16
+8 dBm minimum @ maximum gain
Output 1 dB Compression
± 0.05 ppm maximum over temp internal reference.; external reference input
Frequency Accuracy
Non-Inverting
Frequency Sense
<-25 dBm, measured at Output, at Maximum Gain
Spurious, LO
<-50 dBm, Signal independent; fc ± 2GHz
Spurious, Out of Band
-30 to -10 dBm
Input Level Range
-60 to 0 dBm
Output Level Range
TABLE 1.0
3116-T71-184 Multi-Band Translator Specifications*
Input = +2 to +8 dBm in; Monitor Output = Input Level ±1.0 dB, 50 ohms
10 MHz Level In/Mon
Band Specific
LO Frequency
LO Characteristics
± 2 dB, over RF Band; ± 0.5 dB, 40 MHz BW
Frequency Response
>45 dBC (>50 dBC typical) for two carriers at 4 MHz spacing,
each at -7 dBm out, (Gmax)
Intermod 2 Tone
> 40 dBC Signal Dependent, <-50 dBm signal indep.; -10 dBm in, 0 dBm output
Spurious, Inband
>45 dB, minimum; (at maximum gain and 0 dBm out)
Input to Output Isolation
+20 ±3 dB maximum, (+20 to -40 dB variable in 1 ±1 dB steps)
Gain at Fc
Channel Characteristics
>60 dB from 0 dBm unmuted output (RF Monitor not muted)
Mute
See Band Chart Below
Frequency (GHz)
50
Ω
/ 10 dB minimum, 14 dB typical
Impedance/Return Loss
Output Characteristics
0 dBm @ maximum gain
Non-Damage input
20 dBm at maximum gain (Gmax)
Noise Figure, Maximum
See Band Chart Below
Frequency (GHz)
50
Ω
/12 dB minimum, 14 dB typical
Impedance/Return Loss
Input Characteristics
3.05
10.7 - 11.8
13.75 - 14.85
4
1.05
11.7 - 12.2
12.75 - 13.25
3
2.05
10.7 - 11.7
12.75 - 13.75
2
2.45
3.4 - 4.275
5.85 - 6.725
1
5.6
11.7 - 12.8
17.3 - 18.4
6.6
10.7 - 11.8
17.3 - 18.4
2.05
11.7 - 12.8
13.75 - 14.85
7
6
5
TRANSlLATE
(GHz)
OUT RANGE
(GHz)
IN RANGE
(GHz)
BAND
NUMBER
Band Chart - Frequencies, Translations
-80
-110
-95
-75
-65
1MHz
100kHz
10kHz*
1kHz
100 MHz
Specification dBC/Hz
Phase Noise @ Frequency
