Cross Technologies 3116-T71-184, Инструкция по эксплуатации

Страница: 20 / 22

2.6.6 Alarm Indications
An alarm condition will occur if the local oscillator phase lock loop (PLL) comes out of lock. The Mute LED
will light if you select to mute the Tx Signal and the Remote LED will light when you select the Remote mode.
Power Up
Normal Display
Menu 1 Set Band
Menu 2 Set Gain (-40 to +20 dB)
Menu 3 Mute TX signal
Menu 4 Select 10 MHz
Reference Mode
(Internal, External, Auto)
Menu 5 Reference
Frequency Offset
Menu 6 Select Secondary
Communications Interface
(Option Q)
Menu 7 Interior Temperature
Save Settings? At the end or
when “R” is selected from any of
the above menus
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
FPC 4.00
Load Settings...
PUSH BUTTON
B3 12.75 > 11.70
G = 10.0 Ref=INT
TEMP = +30C
SCROLL <> PUSH BUTTON
BAND = 3
SCROLL <>
SCROLL PUSH BUTTON
R
G = +10
SCROLL <>
SCROLL PUSH BUTTON
R
MUTE OFF
R SCROLL <>
SCROLL PUSH BUTTON
REF OS = +0000
SCROLL <>
SCROLL PUSH BUTTON
R
PUSH BUTTON
COMM INTERFACE
RS232
SCROLL <>
SCROLL PUSH BUTTON
R
REF MODE = INT SCROLL <>
SCROLL PUSH BUTTON
R
SAVE SETTINGS? Y N
R
SCROLL <>
SCROLL PUSH BUTTON
FIGURE 2.5 Menu Display and Sequence
3116-T71-184 Manual, Rev. B Page 20 05/16/16