(Technical Specifications continued on page 5...)
2483-40311 Manual, Rev. 0
Page 4
08/01/18
<-50 dBC for two carriers at 4 MHz spacing, each at -15 dBm out
(set to -30 dB input, 20 dB gain)
Intermodulation
<-50 dBC, in band
Spurious
±1.5 dB, 970 -1130 MHz; ±0.5 dB, 40 MHz BW; ±1.0 dB, 40 MHz BW
Frequency Response
0 to +20.0 dB in 0.5 ±0.5 dB steps
Gain Range (adjustable)
220 to 380 MHz (300 ± 80 MHZ)
Frequency
<-60 dB type, < -50 dB min.; G=20, -30 dBm input level
Channel to Channel Isolation
-30 to -10 dBm
Input Level Range
Input Characteristics
Output Characteristics
Channel Characteristics
Synthesizer Characteristics
-30 to -10 dBm
Output Level Range
TABLE 1.0
2483-40311 Translator Technical Specifications**
None, fixed tuned
Frequency Step
±1.0 ppm max. over temp. (±0.01 ppm, Option H)
Frequency Accuracy
Non-inverting
Frequency Sense
5 ns total, 970 - 1130 MHz out
Group Delay, maximum
+0 dBm, maximum gain
Output 1 dB compression
970 to 1130 MHz
Frequency
50
Ω
/ 12 dB
Impedance/Return Loss
20 dB (set to minimum input, maximum gain)
Noise Figure, max.
50
Ω
/14 dB (See Table 2.2 for connector options)
Impedance/Return Loss
-97 -115
-95 -110
-80
-70
-65
-60
Standard 125 kHz steps dBc/Hz
-83
-77
-69
-65
100k 1M
10k
1k
100
10
Typical: dBC/Hz
Phase Noise @ Freq (Hz)
19 inch, 1RU standard chassis, 1.75” high x 16.0” deep
Size
Controls, Indicators
Other
75
Ω
BNC (female), works with 50 & 75
Ω
10 MHz Connectors
Direct readout LCD; manual or remote selection
Gain Selection
3 dBm, ± 3 dB, 75 ohms (Option -E)
10 MHz Level (In or Out)
100-240 ±10% VAC, 47- 63 Hz, 45 watts maximum
Power
RS232/RS485 selectable, (Ethernet optional)
Remote
Direct readout LCD; manual or remote selection
Frequency Selection
DB9 (female) - NO or NC contact closure on Alarm
Alarm, Remote Connector
50
Ω
BNC (female)
RF IN /RF Out Connector
Green LED; Red LED; Yellow LED
Power; Alarm; Remote
