1.2 Technical Specifications
<-60 dB typical, <-50 dB min.; G = 30, -30 dBm input level
Channel to Channel isolation
-50 to -20 dBm
Input Level Range
Input Characteristics
Output Characteristics
Channel Characteristics
Synthesizer Characteristics
> 50 dB, min.
Image Rejection
-20 to -10 dBm
Output Level Range
TABLE 1.0
2416-x25 Multi-Channel Downconverter Technical Specifications**
125 kHz (as low as 1 kHz steps available)
Frequency Step
±1.0 ppm max. over temp. (±0.01ppm, Option H)
Frequency Accuracy
Non-inverting or Inverting (Selectable)
Frequency Sense
0.015 ns/MHz
2
parabolic; 0.05 ns/MHz linear; 1 ns ripple
Group Delay, max.
< -50 dBc, in band
Spurious Response
±1.5 dB, 2000 - 2500 MHz; ±0.5 dB, 36 MHz BW, ±1.0 dB, 40 MHz BW
Frequency Response
0.0 to +30.0 dB, 1±1 dB Steps
Gain Range (adjustable)
0 dBm
Output 1 dB compression
70 ±18 MHz
Frequency
75
Ω
/ 18 dB (See Table 2.2 for connector options)
Impedance/Return Loss
15 dB maximum gain
Noise Figure, Max.
2000 to 2500 MHz
Frequency
75
Ω
/10 dB (See Table 2.2 for connector options)
Impedance/Return Loss
19 inch, 1RU standard chassis, 1.75” high x 16.0” deep
Size
Controls, Indicators
Other
75
Ω
BNC (female), 50/75
Ω
BNC (female)
RF OUT, 10 MHz
Connectors
Direct readout LCD; manual or remote selection
Gain Selection
3 dBm, ± 3 dB, 75 ohms
10 MHz Level (In or Out)
100-240 ±10% VAC, 47- 63 Hz, 45 watts maximum
Power
RS232C / RS485 Selectable, (Ethernet Optional)
Remote
Direct readout LCD; manual or remote selection
Frequency Selection
DB9 (female) - NO or NC contact closure on Alarm
Connector, Alarm, Remote
50
Ω
BNC (female) See table 2.2 for other options
RF IN Connector
Green LED; Red LED; Yellow LED
Power; Alarm; Remote
(
Technical Specifications continued on page 5...
)
2416-425 Manual
Page 4
11/17/21
