(Status Request continued from page 7...)
TABLE 1.1 2416-x02I Stattus
Stat
us Requests Coontinued
TABLE 1.1 2416-x02I Status Requests Continued
Command
Syntax*
Description
Get RF Frequency
{aa*iSY}
Returns {*iSYx} where :
(Option W160/70)
• i = 1, 2, 3 or 4...
• x = 0 for 70 MHz IF, 1 for 160 MHz IF
Get IP address
{aaSi}
Returns {Sixxx.xxx.xxx.xxx} where :
(If Ethernet Option, W8, W18, or W2
28, enabled)
• xxx.xxx.xxx.xxx = IP address
Get subnet mask
{aaSs}
Returns {Ssxxx.xxx.xxx.xxx} where :
(If Ethernet Option, W8, W18, or W2
28, enabled)
• xxx.xxx.xxx.xxx = subnet mask
Get channel base parms
{aa*iS1}
Returns {*iS1tfffffffgggha} where :
• i = 1, 2, 3 or 4 designating the channel number
• t=channel type: 0 for unused;
1 for upconverter; 2 for downconverter
• fffffff = frequency in KHz
• ggg = gain to nearest 1.0 dB (e.g., +25 = 25 dB)
• h = spectrum output: 0 for non-invert; 1 for invert
• a = alarm: 0 for alarm off; 1 for alarm on
Get alarm status
{aaSA}
Returns {SAabcd} where:
• a=channel 1 alarm state (0 for alarm off; 1 for alarm on)
• b=channel 2 alarm state (0 for alarm off; 1 for alarm on)
• c=channel 3 alarm state (0 for alarm off; 1 for alarm on)
• d=channel 4 alarm state (0 for alarm off; 1 for alarm on)
Get product/model info
{aaSV}
Returns {SV2416-x02Ixxxver5.00} where:
• 2416-x02I = product model
• xxx = list of options, if any
•"ver"=separates model & options from firmware version
• 5.00 = firmware version
2416-402I Manual, Rev. C
Page 8
03/22/21
