Cross Technologies 210-01, Инструкция по эксплуатации

Страница: 4 / 12

MODEL 210-01 CATV AUDIO/DATA DEMODULATOR
SECTION 1 GENERAL
1.1 Equipment Description - The Series 210-01 operates with
standard CATV cable systems to provide a paging system by receiving
the paging audio signal and a data control signal which determines if the
paging message is intended for the location it is programmed for.
Detected data is decoded to determine if the audio is intended for this
location as determined by the location code selected by two BCD
switches on the front panel. When the data matches the location code of
this unit, it switches audio from an external audio source to the paging
audio. A “Carrier Presence” LED , “Data Activity” LED, and “Power”
LED indicates the operating status of the Series 210-01 . Connectors are
RCA Phono plug for external audio in and switched audio out
(unbalanced), F connector for CATV in, and 2.1mm power connector.
Power is provided by a wall mount power supply.
FIGURE 1.1 210-01 Block Diagram and Chassis
MODEL 210
AUDIO / DATA DEMOD
LOCATION CODE
CARRIER POWER
CROSS TECHNOLOGIES, INC.
DATA
55 - 300
MHZ CATV
INPUT
CHANNEL
CONVERTER
AUDIO
DEMOD
DATA
DEMOD DE-
CODER
AUDIO
SWITCH
AUDIO
OUT
SELECT
SWITCHES
EXT AUDIO IN
210-01 manual Rev B Page 4 2/18/00