Cross Technologies 210-01, Инструкция по эксплуатации

Страница: 6 / 12

2.0 Installation
2.1 Mechanical - The 210-01 is packaged in an aluminum extrusion.
The -R option is mounted on a 1 3/4” X 19” panel that can be mounted
to a rack using the 4 holes at the ends. It dDC from the wall
power supply (+12V unregulated). See Figure 2.1.
IF LVL REM GAIN ALARM FREQUENCY (GHZ) TUNE
8 1. 3 3
2004 TEST UPCONVERTER
CROSS TECHNOLOGIES, INC.
-25 -45 -65 UP DOWN
FIGURE 2.1 SERIES 2000 ASSEMBLY DRAWING
EXTRUSION
BACKPLANE
REAR SCREWS (4EA)
FRONT SCREWS (4EA)
FRONT PANEL
RACK MOUNT PANEL (FOR -R MODELS ONLY)
PCB ASSEMBLY
WALL
POWER
S U P P L Y
210-01 manual Rev B Page 6 2/18/00