Cross Technologies 2016-26, Инструкция по эксплуатации

Страница: 16 / 18

2.5.5 Alarm Indications
An alarm condition for will occur if the local oscillator phase lock loop (PLL) comes out of lock.
The Mute LED will light if you select to mute the Tx Signal and the Remote LED will light when you select
the Remote mode.
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
REV 1.00
F=2050 G=+00
F = 2050
SCROLL <>
SCROLL PUSH BUTTON
DNSPECTRUM NON
REMOTE OFF
EXT REF OFF
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up
Normal Display
Menu 1 Down Frequency
Menu 2 Down Gain (0 to +50)
Menu 3 Set Unit to Remote
Operation
Menu 4 Select Non-inverting or
Inverting Spectrum
Menu 5 Select External 10 MHz
Reference (option E)
Menu 6 Select 10MHz Output
(option E)
Menu 7 Select RS232, RS422, or
RS485 remote control (option Q)
Menu 8 Select remote address for
unit (RS485 only) (option Q)
Save? When “R” is selected from
any menu above, or at the end
G = +00
SCROLL <>
SCROLL PUSH BUTTON
SAVE SETTINGS? Y N
SCROLL <> PUSH BUTTON
R
R
R
R
R
R RS232
DN REF OUT OFF R
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
R ADDRESS = 00
SCROLL <>
SCROLL PUSH BUTTON
FIGURE 2.5 Menu Display and Sequence
2016-26 Manual, Rev. A Page 16 2/2/09