Crosley CR1206A, Инструкция по эксплуатации

Страница: 12 / 16

CD Operation
PROGRAMMING TRACKS
CD PLAYER
Playing a CD
1 Press the FUNCTION / to set the unit to CD
mode.
2 Press CD OPEN / CLOSE / to open the CD
compartment
3 Insert a disc with the printed side facing up.
Press CD OPEN / CLOSE / . again to close
the compartment, READ is displayed as the CD
player scans the contents of a disc.
4 Track no. 1 will be playback automatically after
finish the reading CD disc contents.
5 Press FF / or FB / once or repeatedly
until the desired track number appears in display.
6 Press STOP/BAND / to stop playback.
CD-MP3 disc playback
1 Insert CD-MP3 format disc. Press
CD OPEN /
CLOSE / again to close the compartment.
READ is displayed as the CD player scans the
contents of a disc.
2 Track no. 1 of root folder (Folder 1) will be playback
automatically after finish reading CD-MP3 disc
contents.
3 Press FF / or FB / once or repeatedly
until the desired track number appears in display.
4 Press / or PRESET – / to select
desired album.
5 Press STOP/BAND / to stop playback.
You may store up to 20 tracks in the desired
sequence.
1 In the stop position, press PROGRAM / to
start programming. Icon “MEMORY” and P0-01
start flashing.
2 Press FF / or FB / once or repeatedly until
the desired track number appears in the display.
For MP3:
press / or PRESET – / to select
the desired album.
3 Press PROGRAM / to confirm, display shown
stored track no. and next store position.
4 Repeat step 2-3 to select and store all desired
tracks. FULL is displayed if you attempt to program
more than 20 tracks
5. Press PLAY/PAUSE / to play the program.
You can erase the contents of the memory by:
-
once if in stop position, twice during playback;
- Press POWER /
- Select another sound source
- Open the CD door
ERASING THE PROGRAM
11