Crosley CR1206A, Инструкция по эксплуатации

Страница: 11 / 16

RADIO OPERATION
Basic Operation
AM/FM Tuning
1 Press the FUNCTION / to set the unit to
TUNER mode.
2 Press STOP/BAND / repeatedly to select
your desired waveband. FM or AM
3 Auto Tuning – Press and hold FF / or FB /
until frequency begins to scroll the radio
automatically tunes to a station with sufficient
reception. If a station in received in stereo, (ST)
is shown. Repeat step 3 if necessary until you
find the desired station.
4 Manual Tuning – Press FF / or FB / briefly
and repeatedly until found a station.
Programming radio stations
You can store up to a total of 40 radio stations (FM
and AM) in the memory, manually or automatically
(Autostore)
1 Tune to your desired station
2 Press PROGRAM / to activate programming,
icon “ MEMORY” and P01 will start flashing.
3 Press / or PRESET – / to
allocate a number from 1 to 20 stations.
4 Press PROGRAM / to confirm, display shows
the preset number waveband and the frequency
of the preset station.
5 Repeat steps 1-4 to store other stations to listen
to a preset station. Press / or
PRESET – / once or more until the desired
preset station in displayed.
To listen to a preset station
Press / or PRESET – / once or
more until the desired preset station in displayed.
Automatic programming radio stations Automatic
programming will station preset 1, from this preset
number upwards, former programmed tuner stations
will be erased.
1 Press and hold PROGRAM / button until Auto
appears
- Icon “ memory” will start flashing
- Available stations are programmed
- After all stations are stored, the last preset station
will then be played
10