Crivit 73018, Инструкция по эксплуатации

Страница: 4 / 21

6 7
package contents:
(a)
1 mini foot air pump
1 metal adapter for balls
1 plastic adapter for air mattresses, inflatable toys, etc.
1 storage and transport bag
technical data:
type: mini foot air pump
service centre no: 26301 (e81011)
ian no. 73018
nominal excess pressure: 7 bar / 100 psi
production date: 01-2012
Warranty: 3 years
!
attention safety instructions!
You can inflate all bicycle tyres up to the pump’s indicated maximum
tyre pressure (max. 7 bar / 100 psi) or to the tyre manufacturer’s
indicated maximum tyre pressure. this can usually be found on the
tyre wall. the indicated maximum values may not be exceeded at any
time. defective or damaged air pumps may no longer be used due to
risk of injury.
defective mini foot air pumps must be properly disposed of. repairs are
not possible. due to the high operating force and the risks associated
with this, the product is not suited for use by children or persons with
physical and/or mental impairments. please note that the pump plunger
and pump cylinder become very hot over longer periods of pumping
due to the friction between them. For this reason, after pumping you
should only hold the pump by the pedal surface in order to avoid burns.
due to the risk of injury, a defective or damaged mini foot air pump
may never be used.
defective pumps must be properly disposed of since repairs are not
possible.
initial use of the pump:
(B1)
please ensure that the pump plunger is spring loaded and quickly
rebounds when opening it.
release the pump plunger by placing the pump on the ground. next,
press the pump plunger downwards with your hand, while at the same
time folding out the bracket with your other hand, so that this can be
used as pump pedal.
to lock the pump, proceed in reverse order.
- While pumping, make sure to always place one foot on the
retaining bracket of the pump to prevent it from tilting (B2) .
- place one foot on the folded down retaining bracket of the pump.
By treading steadily on the red pedal surface, the connected object
will be inflated
(B3 ).
- Make sure that the pump tube is not bent.
- When pumping watch the display of the pressure gauge.
- please note that some types of valves do not show the air pressure.
this applies in particular to old dunlop valves.
- the pressure gauge display value may slightly differ from the actual
pressure.
adapter: (c1)
(1) e.g. balls
(2) e.g. air mattresses
(3) to inflate inner tubes with schrader valves
e.g. cars, trolleys and trailers.
(4) to inflate inner tubes with blitz valves,
e.g. city/trekking bicycles
(5) For inflating inner tubes with a presta valve, e.g. on racing
bicycles and mountain bikes.
(6) dual head (to lock in place, please fold down the lever at the
pump head.)
(valves not included)