Crivit 285681, Инструкция по эксплуатации

Страница: 6 / 38

8 GB/IE/NI
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the
following instructions for use.
Use the product only as described and only for
the given areas of application. Keep these instruc-
tions safe. When passing the product on to a third
party, always make sure that the documentation
is included.
Scope of delivery /
Part names (figure A)
1 x Arm and leg trainer with resistance screw
and display (incl. AAA battery LR03) (1)
1 x Foot, small (2)
1 x Foot, large (3)
2 x Pedals (4)
4 x Screws (5)
4 x Washers (6)
1 x Allen key with screwdriver (7)
1 x Wrench (8)
1 x Instructions for use
Technical data
Dimensions: approx. 42 x 31 x 38cm
(W x H x D)
Weight: approx. 4.8kg
Maximum load capacity: 100kg
Device class: HC (for use in private households,
precision C) / not suitable for therapeutic training
This training device is independent of rotational
speed
Power supply: 1.5 V battery type AAA, LR03
Correct use
The article is not designed for commercial use.
The article allows the user to train arms and legs;
fitted with a resistance screw to increase and
maintain mobility. An integrated display shows the
training progress.
Symbols used
Date of manufacture (month/year):
06/2017
Safety notes
Important: Read the instruc-
tions for use through care-
fully and always keep them
for future reference!
• The article is not suitable for
therapeutic purposes.
• Sit in a relaxed, upright positi-
on with a straight back during
the exercises.
• Exchange any defective parts
of the article immediately and
discontinue use until the main-
tenance is carried out.
• Please note that incorrect or
excessive training can cause
injury to health.
• Stand the article on a horizon-
tal, level surface.
• Use a non-slip mat on a smooth
surface.
• Pay attention to wear to the
parts. If the article no longer
exhibits any resistance on the
pedals then the drive belt is
worn and the article needs to
be replaced.
• An area of approx. 0.6m must
be present around the training
area (figures I and J).
• Children may not carry out
cleaning and user-maintenance
without supervision.