Factory Patch Listing
Basic Sampler
Categories: sampler
Press and hold the Aux button (or a foot switch) to record a sound (two seconds maximum).
Playing the keys then plays back the sound at different pitches. Use the knobs to adjust
overall speed and to add an envelope to the sample, allowing you to shape the sound in
interesting ways.
Metronome
Categories: utility
A basic metronome patch. Start and stop the metronome with the Aux button. Control
tempo and select a beat accent (or none). The keyboard plays a basic synthesizer tone that
can be useful for tuning up.
Nice Surprises
Categories: synth, sequencer
Control three square wave oscillators with this patch. The keyboard controls the base
frequency of one oscillator, which is also tunable from Knob 2. The second oscillator plays a
selectable harmonic of the base frequency. The third oscillator plays a variable amount of
random junk frequencies at the beginning of each note.
You can also adjust how the oscillators to glide to their next frequency (the “Slidiness”
factor). The Aux button controls a simple sequencer: hold it down to enable recording,
begin playing to start recording, and press Aux again to finish.
Quad Delay
Categories: effect, delay
The audio input is fed through four delay lines, each with a delay time that is a multiple of a
base delay time. The base delay time is set by the keyboard. This is a nice way to build up a
deranged stack of sound. Knobs control feedback.
Page
!
of
!
48
51