10
MAIN UNIT
- Upper part of the equipment made with injected ABS plastic where the
heating element, cooler and On/Off Switch are located (Fig.2, page 11
and Fig.7,
page 12
);
ON/OFF SWITCH -
It is in the front side of the main unit (Fig.2, page 11), its function is to
turn the distiller on and off, it also works as “RESET” button;
PREHEATING AREA
- Area located around the boiling tray, it allows the pre-heating of
the water (Fig.3, page 11);
BOILING TRAY -
Made with heat resistant plastic, it is where the boiling actually occurs,
it is removable and can be easily cleaned, manually or in a dish washer (Fig.3, page
11);
WATER LEVEL TRAY -
Its purpose is to contain the water to be distilled, (Fig.3, page 11);
WATER TRAY -
Attached on the base unit, it holds the tap water container and the
water to be distilled (Fig.3, page 11);
BASE UNIT -
It works as a base for all the other parts of the distiller, it is made with heat
resistant plastic, it is removable and easy to clean, (Fig.4, page 11);
TAP WATER CONTAINER
- Fitted in the back part of the distiller, it stores the tap water to
be distilled, it is removable and can be easily filled under the tap, (Fig.5, page 11);
TAP WATER CONTAINER CAP WITH SPRING VALVE -
Special cap that acts as a valve for
the water in the tap water container, (Fig.5, page 11);
CARBON FILTER -
When the water is to be used for human drinking (considering that
distilled water loses minerals during the distillation process), fit the carbon filter on the
distilled water container entrance for extra fresh tasting water (additional carbon filters
are available for purchasing), (Fig.6, page 11);
DISTILLED WATER CONTAINER -
It is the frontal square container where the distilled
water is stored, it has a cap and can be put in the refrigerator to cool the water, (Fig.6,
pág.11);
DISTILLER GENERAL FEATURES
1
2
3
4
5
6
7
8
9
10
C R I S T Ó F O L I
D I S T I L L E R
I N S T R U C T I O N M A N U A L
11
Содержание Distiller
Страница 2: ......
