CristalRecord 85-160-25-100, Руководство пользователя

Страница: 5 / 12

1
2
3
4
5
6
7
8
9
Mount the mounting bracket onto outlet box by the two
screws, spring washers and fiat washers
Hang the ball joint and the fan onto the bracket. Make
sure the guide pin of bracket is fitted into slot of ball joint.
Insert the remote-control receiver between the bracket
and the downrod, and the sensor as shown.
Connect the pair of 3 way male/female connector from
the bracket to the remote control receiver and connect
the pair of 4 way male/female connector from the remote
control receiver to the fan.
Connect wires from supply and the bracket to the wiring
terminals as follow:
a. brown wire “L”
b. blue wire “N”
c. green/yellow stripes wire. “I”
Attach canopy to the bracket by aligning canopy holes
with the bracket side holes. Lift fan until the set screws
reach the bottom of the slots and then rotate canopy
counterclockwise until the screws drop into the slot re-
cessed.
Fix canopy onto the bracket by tightening the screws.
Install fan blade sets onto blade bracket by tightening the
set screws flat washers and spring washers.
Insert male connector into the female connector securely.
FAN INSTALLATION