background image

 

OPERATING INSTRUCTIONS 

 

ARM / DISARM WITH IGNITION ON (PROGRAM OPTION #15) 

This  feature  allows  the  system  to  be  armed  or  disarmed  while  the  ignition  is  in  the  ON  position  or  vehicle  is 
running.  The feature is disabled by default and should not be used under normal operating conditions.  On an 
installation with an add-on remote start module, this option can be enabled to allow the system to be armed or 
disarmed when the vehicle has been remote started (Ignition will be ON).  Note that you cannot use this feature 
if  you  are  also  using  the  Full-time  carjack  protection.    If  you  add  a  remote  start  and  the  Ignition  turns  on,  a 
Carjack trigger will be activated. 

 
ACTIVE RE-ARMING (FAIL-SAFE PROTECTION) 

Active  Re-arming  means  that  the  system  will  re-arm  itself  30  seconds  after  disarmed  with  the  transmitter  if  a 
door has not yet been opened.  This is handy if the vehicle is accidentally disarmed (via the transmitter in your 
pocket)  without  you  knowing  it.    This  feature  can  also  be  turned  off  in  programming  option  (6).  Active  rearm 
feature is disabled if you also have dome light illumination installed. 

 
IGNITION-CONTROLLED DOORLOCKS 

The doors  will  automatically lock when the ignition is turned on and  will unlock when  the ignition is turned  off.  
This  feature  can  be  programmed  on,  off,  or  to  lock  the  doors  only.   

  Doors  will  not  lock  if  they  are  open  to 

prevent locking the keys in. 

 
TRUNK / HATCH POP (REMOTE AUX. OUTPUT 1, OPTIONAL) 

To pop the trunk, press and release the Trunk button on the transmitter. 

If the system is armed, it may or may 

not  trip  the  alarm  system  when  opening  the  trunk  depending  on  programming  option  (10).  See  programming 
option chart for more details. 

 
2

nd

 AUX. OUTPUT (REMOTE AUX. OUTPUT 2) 

To activate the Second auxiliary output  Press and hold the Silent Button for 3 seconds to activate AUX. channel #2. 

 

DOME LIGHT ILLUMINATION (OPTIONAL) 

This feature turns on the vehicles dome light upon disarm for 30 seconds or until the key is inserted and turned 
on.  This will provide illuminated entry to your vehicle at night or in dimly lit areas for added safety and security.  
Note that dome light illumination will deactivate the active rearm feature if programmed for active rearm. 
 

Содержание Fortress FS-20













Отзывы: