2-VEHICLE OPERATION
VEHICLE #2
Press lower side button
first, then you have
3 seconds to
control vehicle #2.
The EZ-30/10 systems can be used for 2 vehicle operation. A single remote can control a second vehicle with an
identical system installed. There are some
exceptions. See “Multi-Vehicle Notes” section
below.
Pressing the lower side button on your remote
transmitter switches your remote to car #2 mode for
3-seconds. You can continue operating Vehicle #2
functions within this 3-second window as long as
you keep pressing buttons. Once the 3-second
time period has elapsed, your remote will switch
back to Vehicle #1 (primary vehicle).
See diagram at right on how to switch your
remote(s) to vehicle #2 operation. To set up the
2-Vehicle operation you must first program your
remotes to Vehicle #2. Follow the “Transmitter Programming” steps at the second vehicle and learn YOUR remote,
along with vehicle #2’s existing remotes.
MULTI-VEHICLE NOTES:
(1) The EZ-30 system can remote start an EZ-10 one-button system using the EZ-30’s Unlock button as the
“start” button for an EZ-10.
(2) An EZ-10 system remote can ONLY control another EZ-10 system. You cannot remote start any other
models using the EZ-10.
(3) Other EZEE Start remotes, such as the EZ-90 system, can be programmed to control an EZ-30 or EZ-10
system.
17
