background image

 

16 

OPERATING INSTRUCTIONS 

 

VALET MODE 

To  disable  the  Alarm  system  for  vehicle  service  or  otherwise,  turn  the  ignition  on  and  press  the  override/program  button  4-5 
seconds until the dash LED turns on solid and you hear (1) siren chirp.  Repeat the process to exit VALET mode and the system 
will chirp (2) times and the LED  will turn off.  Lock/Unlock and AUX features will still operate in when in VALET  mode.  When 
performing  an  Emergency  Override  and  you  hold  down  the  override  button,  the  system  is  also  placed  into  Valet  mode.    See 
Emergency Override section on previous page. 

 

PASSIVE ARMING / PASSIVE LOCK MODES / PASSIVE CHIRP COUNTDOWN 

If  programmed,  passive  (Automatic)  Arming  will  occur  30  Seconds  after  the  ignition  is  turned  off  and  the  last  door  has  been 
closed.  The LED will begin flashing rapidly while counting down.  If a door is reopened, the system will wait for the door or zone 
to close before arming.  The unit will flash the lights once. Doors will lock if passive locking is selected.  May qualify for insurance 
discounts-check with your agent or proprietor.  When the Unit is programmed for Passive Chirp Countdown, the siren will chirp 
during passive countdown, as an audible warning that arming will occur.  This siren will emit a chirp every 2 seconds as soon as 
the last door is closed until the system arms 30 seconds later. 

 
DOMESTIC SOFTWARE: ONE TIME PASSIVE ARMING 

Passive Arming will work only one time after the ignition is turned off. When you disarm the alarm and re-enter vehicle, the alarm 
system will not Passive Re-Arm. 

 
EXPORT SOFTWARE: FULL TIME PASSIVE ARMING 

The alarm system will always Passive Re-Arm after disarm. The ignition must be turned on to stop Passive Arming.  

 

PRIOR INTRUSION ALERT 

If the system was tripped in your absence, the dash LED will be flashing rapidly.  When the system is disarmed you will hear 3 
chirps (and 3 light flashes).  Carefully inspect your vehicle to see if there is any damage or a theft has occurred. 

 

DOME LIGHT ILLUMINATION (OPTIONAL) 

This  feature  turns  on the  vehicles  dome  light  upon disarm  for  30  seconds or until  the  key  is  inserted  and  turned on.   This  will 
provide  illuminated  entry  to  your  vehicle  at  night  or  in  dimly  lit  areas  for  added  safety  and  security.    Note  that  dome  light 
illumination will deactivate the active rearm feature if programmed for active rearm. 

 

OPEN ZONE ALERT/BYPASS 

If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY ARMED, the siren will chirp 5 times 
along with 5 light flashes.  The faulty zone will be automatically bypassed. 

 

IGNITION-CONTROLLED DOORLOCKS 

The doors will automatically lock when the ignition is turned on and will unlock when the ignition is turned off.  This feature can 
be programmed on, off, or to lock the doors only.  

 Doors will not lock if they are open to prevent locking the keys in. 

 
 

 

Содержание CS-2002DPII





















Отзывы: