Fermod Floor Guided Sliding Door Hardware Kits -
F2156 Installation Guide
www.crh.com.au
13
Step 8.
Assembly of the ramps, running profile and rail
stops.
Note. The drawing shows a left hand opening
door and should be reversed for a right hand
opening door.
• Slide the running profile, ramps and clamps into
the rail (see drawing for mounting order)
• Tighten the clamp/closing side. Clamp should
be flush with the end of the main rail.
• Opening side, push the clamp so all parts are in
contact and tighten.
• Slide the rail stops onto each end of the rail and
temporarily tighten.
