Fermod Floor Guided Sliding Door Hardware Kits -
F2156 Installation Guide
www.crh.com.au
2
Fermod F2135 Floor Guided Sliding Door System
General Characteristics
This is a manual system with an anodized rail designed to fit horizontal sliding doors with specific characteristics, (isothermal, acoustical,
clean-rooms, dust tight).
When the door is closed, tightness of the door against the frame is achieved by 2 rollers moving down the ramps and in against the door frame.
When the door is open, the 2 rollers come up the ramps and the door moves away from the floor & frame. This means that the door seals are
only in contact when the door is in a closed position. The rollers run effortlessly along the rail until they reach the end of the track stop.
This system is suitable for doors within the following specifications:
Specification
Minimum
Maximum
Door Blade Width
2001mm
2300mm
Door Blade Height
-
2900mm
Door Blade Thickness 50mm
150mm
Door Weight
-
120Kg
The operating temperature is between -30 °C and +55 °C.
The maximum noise level generated when the door operates is lower than 85dB.
The lever handle recommended for use with this system are as follows:
Internal Lever Handle :
F8530, F8530P (Packer)
External Lever Handle.
F8730-70/115K Used for door blades including gasket between 70mm and 115mm thick.
F8730-115/160K Used for door blades including gasket 115mm and 160mm thick.
