Fermod Floor Guided Sliding Door Hardware Kits -
F2156 Installation Guide
www.crh.com.au
26
Step 27 Continued
Hole location on the door blade in the closed
position.
Note:
Some door construction methods have a
10mm to 15mm thick PVC thermal break /
packer around the inside edge of the door
where the frame gasket is fitted. If this is the
case a packer is required to be used for the
internal handle. This is available as an ad-
ditional item to the standard kit, stock code
F8530P
.
Failure to install the packer may mean the
internal lever handle will not connect with the
strike.
