EG20/32/48/60-M-A/E-S
Last printed 9/10/2007 1:56:00 PM
11
BEGIN SERIAL NO: 00035540
5.
SALT/SUGAR WITH ONE POP ADJUSTMENT
a.
If the Salt/Sugar switch is in the sugar position, use the “Digital
Temperature Control Adjustment” section.
b.
If the Salt/Sugar switch is in the salt position, the temperature is adjusted on
the One Pop Timer/Relay.
c.
On the Relay there are dip switches very similar to the timer in our 7700-7900
pumps.
d.
From the factory the dip switches 7 and 9 will be on. To turn the dip switches
ON the dip switch needs to be pressed down to the number side opposite of
the open side.
Switch #6 = 5 seconds
#7 = 10 seconds
#8 = 20 seconds
#9 = 40 seconds
Example: If you turn #7 and #9 on, the time delay will be 50 seconds.
C.
Kettle Removal
To remove the kettle assembly, perform the following operations:
1.
Unplug the popcorn machine from the power supply. Make sure the kettle
is not hot.
2.
Remove the cover on the terminal box between the pan support legs.
3.
Disconnect the three power leads, observing the color of the wires. Correct
color code is: Left to right, BLACK, RED, WHITE. (For 400V units BLUE,
BROWN, WHITE on front terminal left to right, Black on back terminal.)
4.
Remove the two bolts on the side of the aluminum pan legs.
Using proper lifting techniques, when removing the kettle by lifting it
straight up.
