Crestron TSS-1070, Руководство по эксплуатации продукта

Страница: 22 / 120

18 • TSS-70 Series Product Manual — Doc. 8745D
l
The TSW-770/1070-RMB-1 , TSW-770/1070-RMB-2 , and TSW-1070-RMB-3 retrofit
mounting brackets allow for retrofit installations in place of an older Crestron touch
screen (APAD, CT-1000, LC-1000, TPS-4L, TPS-6L, or TPS-2000L) without having to tear
out the old mounting hardware or patch the wall.
l
Thought not typical for most scheduling applications, the TSW-1070-RMK-2 rack mount
kit can be used to mount the touch screen into a 19 in. rack. When installed, the touch
screen occupies four rack spaces.
Notes:
1. Microsoft determines the functionality and appearance of the Microsoft Teams room scheduling application.
Refer to the Microsoft website for more information.
2. Additional subscriptions and/or licenses may be required. Refer to the Microsoft website for details about the
capabilities and requirements of its scheduling application and services. The TSS-1070-T cannot be interfaced
with a control system and cannot be custom programmed for any other functionality. An internet connection is
required.
3. The TSS-1070-T must be powered by a PoE+ power source when a light bar or hallway sign is connected. Refer to
the Accessories section for a list of all available options. Refer to each accessory’s spec sheet for further
information.
4. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control,
multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are
specifically programmed and configured to work with them.
5. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and
TSW-BBI series back boxes, allowing the TSS-1070-T to be installed in place of a previous generation touch
screen.