Crestron TPS-ENETL, Руководство по эксплуатации и установке

Страница: 5 / 32

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel
Ethernet Card for TPS/Lectern
Panel: TPS-ENETL
Introduction
Features and Functions
The TPS-ENETL Ethernet card is an optional feature designed for
Crestron’s Isys™ wall/lectern mounted TPS-5000L and TPS-6000L
touchpanels and the TPS-TPI touchpanel interface. The card provides
communication via Ethernet/local area network (LAN) and wide area
network (WAN) to any Crestron Internet protocol (IP) control device.
Adding Ethernet capabilities into the touchpanel via SIMPL™
Windows® allows remote diagnostics and upgrades, access to Crestron’s
network analyzer, and the ability to activate any device connected to the
Crestron remote control system (herein referred to as the Cresnet
system). The TPS-ENETL also allows a TPS touchpanel to communicate
through Ethernet with multiple control systems. Refer to “Ethernet
Setup” on pages 16-17. For additional information, refer to the “Ethernet
Touchpanels” and “IP Table Setup” sections of the latest revision of the
Crestron e-Control Reference Guide (Doc. 6052). The latest version can
be obtained from the Downloads | Product Manuals section of Crestron’s
website (
www.crestron.com) .
Functional Summary
Provides Ethernet communication for a TPS touchpanel
10BaseT or 100BaseT, half or full duplex networking
Supports several protocols including TCP/IP, UDP/IP, etc.
Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL
•
1