Crestron TPS-ENETL, Руководство по эксплуатации и установке

Страница: 6 / 32

Ethernet Card for TPS/Lectern Panel Crestron TPS-ENETL
Specifications
The table below provides specifications for the TPS-ENETL.
Specifications of the TPS-ENETL
SPECIFICATION DETAILS
Power Requirements 4 Watts (0.167 Amps @ 24 VDC)
Control System Update Files
1, 2, 3
2-Series Control System Update Version C2-2004.CUZ or later
CNMSX-AV/Pro Update File (.upz) Version 51263X or later
CNRACKX/-DP Update File (.upz) Version 51263W or later
CEN/CN-TVAV Update File (.upz) Version 51263V or later
Acceptable file extension: (TPS 5000L and 6000L only)
.csf
TPS. v1.013.0 .csf or later (panel
firmware file)
Network Type 10BaseT/100BaseT, half or full duplex
Protocols TCP/IP, UDP/IP, ICMP (Ping), & CIP
Default IP Ports 41795 (Viewport/Diagnostics)
41794 (CIP)
LED Indicators GREEN for link status and YELLOW for
Ethernet activity
Dimensions & Weight Height: 1.02 in (2.60 cm)
Width: 1.43 in (3.62 cm)
Depth: 5.85 in (14.86 cm)
Weight: 1.20 oz (0.03 kg)
1. The latest versions can be obtained from the Downloads | Software Updates section of the Crestron website
( www.crestron.com) . Refer to NOTE after last footnote.
2. Crestron 2-Series control systems include the AV2, PAC2, PRO2, and RACK2.
3. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX update files
have a UPZ extension and are in one EXE or zipped UPZ file. To avoid program problems, make certain you
are using the update file with the correct suffix letter (e.g., S, V, W, X).
NOTE : Crestron software and any files on the website are for
Authorized Crestron dealers only. New users may be required to register
to obtain access to certain areas of the site (including the FTP site).
2
•
Ethernet Card for TPS/Lectern Panel: TPS-ENETL Operations & Installation Guide - DOC. 6013