Ethernet Card for TPS/Lectern Panel
Crestron
TPS-ENETL
Viewport Connect TCP/IP
2. As shown below, enter the IP address of the configured
touchpanel and select the
Connect
button.
“Crestron Viewport TCP/IP Connect” Window
3. If a password has been set for the touchpanel, an access
password is required to connect.
NOTE:
To set a password, use
Functions | Set TCP/IP Console
Password
in Viewport. The “Enter New Password” window appears and
prompts the user to enter and verify a password. You can also disable a
password using
Disable Password
in the window.
4. As shown on next page (left), enter the required password. (The
correct password must be entered within three attempts or the
password window shown on next page (right) displays a
password invalid message.)
18
•
Ethernet Card for TPS/Lectern Panel: TPS-ENETL
Operations & Installation Guide - DOC. 6013
Содержание TPS-ENETL
Страница 1: ...Crestron TPS ENETL Ethernet Card for TPS Lectern Panel Operations Installation Guide ...
Страница 4: ......
