Crestron TPMC-8T-GA Скачать руководство пользователя страница 38

Страница: 38 / 56

8.4” TableTop WiFi Touch Screen

Crestron

TPMC-8T-GA

•

8.4” TableTop WiFi Touch Screen: TPMC-8T-GA

Operations Guide – DOC. 7262F

NOTE:

The hostname is required for Ethernet communication.

Sharing

Touch

Sharing

to open the

Configure Shared Folders

window. This window is

used to set up shared folders. Sharing enables remote computers to view or modify

files stored on the touch screen.

Configure Shared Folders Window

Touch

Add New Share

to browse and add directories with permission to read only

or read/write. Touch

Close

after adding all folders to be shared.

NOTE:

For security reasons, there is no persistence of the shared drive(s) after the

touch screen is rebooted.

Battery Details

The

Battery

section of the setup menu is not applicable to the TPMC-8T-GA and is

not used.

Standby Details

The

Standby

function turns off the backlight when the touch screen is inactive for a

specified time. Use the

and

Down

buttons to set the

Standby

from 0 through 120

minutes, where 0 disables the timeout. Touch the screen to reactivate the touch

screen from standby mode. When the touch screen is reactivated, the last screen to be

displayed reappears.

NOTE:

The hard buttons still function when the touch screen is in standby mode

but do not cause it to awaken from standby. The screen must be touched to reactivate

the touch screen.

Power Down Details

The

Power Down

section of the setup menu is not applicable to the TPMC-8T-GA

and is not used.

WiFi Status Details

The

WiFi Status

section of the setup menu contains a bar graph showing the

strength of the Wi-Fi signal as well as an indicator to show when the TPMC-8T-GA

Содержание TPMC-8T-GA

























































Результаты поиска

Содержание TPMC-8T-GA

Отзывы:

Похожие инструкции для TPMC-8T-GA

Бренды по названию

Популярные бренды

Crestron TPMC-8T-GA, Руководство по эксплуатации

Результаты поиска

Содержание TPMC-8T-GA

Отзывы:

Похожие инструкции для TPMC-8T-GA

Бренды по названию

Популярные бренды