Crestron TPMC-8T-GA, Руководство по эксплуатации

Страница: 29 / 56

Crestron TPMC-8T-GA 8.4” TableTop WiFi Touch Screen
Operations Guide – DOC. 7262F 8.4” TableTop WiFi Touch Screen: TPMC-8T-GA • 25
From either the numeric or the symbol keyboard, touch the key to
return to the alpha keyboard.
The initial position of the on-screen keyboard is determined by the VT Pro-e
program or Crestron Studio or SIMPL Windows settings. The on-screen keyboard
defaults to its largest size.
When the on-screen keyboard is moved or resized and then closed, it re-opens at the
same position and size it was when closed. This position and size remain in memory
until the touch screen is re-booted or it is re-set by the Crestron Studio or SIMPL
Windows program. After reboot, the position of the on-screen keyboard reverts to
the default position set in the VT Pro-e, Crestron Studio or SIMPL Windows
program. The size reverts to the largest as determined by the firmware installed in
the touch screen.
Exit the on-screen keyboard by touching the red close button in the upper right
corner of the keyboard window. If the Keyboard button on the setup menu is still
visible, it can also be touched to exit the keyboard.
Diagnostic
Touch Diagnostic to display the firmware version number, view Installed Packs
and to reset the end user license from the
Diagnostics
window.
Diagnostics Window
Reset CTP Port resets the default value of the CTP port to 41795, for terminal
connection using Crestron Toolbox.
To configure the appearance of popup messages and passcode messages, touch
Configure Messages . The Message Configurations Properties window opens.