Crestron TPMC-12 Isys i/O, Руководство по эксплуатации

Страница: 44 / 74

Isys i/O
®
Tilt Touchpanel Media Center Crestron TPMC-12
Save & Reboot and Shutdown Details
To save any changes and reboot the touchpanel, touch Save & Reboot , located in the
lower right section of the setup menu.
To turn off the touchpanel, touch Shut Down , located in lower right section of the
setup menu. This is the recommended method for shutting down the touchpanel.
After the touchpanel has shut down, the power supply can be safely removed from
the touchpanel.
Exit Details
Touch Exit to leave the setup menu and return to the project. If no project has been
loaded, the touchpanel will display an error message and return to the setup menu.
Hardware Hookup
Ventilation The TPMC-12 should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications.
Connect the Device Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring”, “CAT5 Wiring” and “QuickMedia Wiring”
on page 14 before applying power. If the TPMC-CH-IMC is to be used for
connecting CAT5 audio and CAT5 video, refer to the latest revision of the
TPMC-CH-IMC Operations Guide (Doc. 6345) for more information.
Hardware Connections for the TPMC-12
NET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
GROUND
USB:
FOR 3
RD
PARTY
PERIPHERALS
LAN:
10/100/100 Mbps
HIGH SPEED ETHERNET
QM IN:
QUICKMEDIA AUDIO,
VIDEO & MIC
INPUT OVER CAT5
VID IN:
BALANCED VIDEO
INPUT OVER CAT5
AUD I/O:
BALANCED AUDIO IN
& MIC OUT OVER CAT5
MEMORY EXPANSION:
FOR MMC
COMPATIBLE CARD
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
40
•
Isys i/O
®
Tilt Touchpanel Media Center: TPMC-12 Operations Guide – DOC. 6675A