Crestron
Serial Mouse Control Driver
Software
5. Refer to the diagram below. In the
Type
drop-down list of the desired Pad Area,
select
Mouse
(Pad Area 1 is shown).
Select Mouse in Pad Area 1
6. In
the
Communication via
drop-down list of the Project Properties dialog box,
select either Serial or Cresnet or TCP/IP (for Ethernet operation) and continue
with this step.
6a. If
Serial
is selected, proceed to step
7
below.
6b. If
Cresnet
is selected, select the serial join number (specified during step 1
of “
SIMPL Windows Programming
” that begins on page
13
) to reference the
assigned touchpanel serial output from the
Serial Join
drop-down list.
6c. If
TCP/IP
is selected, select the serial join number (specified during step 1 of
“
SIMPL Windows Programming
” that begins on page
13
) to reference the
assigned touchpanel serial output from the
Serial Join
drop-down list. Then
select the desired device ID from the
Device ID
drop-down list (specified
during step 3 of “
VT Pro-e Programming
” that begins on page
16
.)
7. In Project Properties dialog box, click
OK
.
8. Open (or create) a page or subpage and select
Draw | RGB Window
(or from the
Objects Drawing
toolbar, click the
Draw RGB Window
button).
9. Position the cursor on the page and drag out a box of the desired size.
10. Double-click the RGB window to display “RGB Video Properties” dialog box
and set parameters, as with any other VT Pro-e object.
11. In the RGB Video Properties dialog box, select the
Design
tab.
NOTE:
Full screen RGB video is recommended. If full screen RGB video is not used,
calibration of the screen is required.
Programmer’s Guide - DOC. 5916A
Serial Mouse Control Driver
•
17
