Crestron QM-RMCRX, Руководство по эксплуатации

Страница: 44 / 64

QuickMedia™ Receiver/Processor Crestron QM-RMCRX
In Program Manager, the C2Net-Device symbol contains no signals; to program
a controlled Cresnet device, expand C2Net-Device in
Program View . Then drag
the device to Detail View .
Slot 6: C2I-RX-VIDEO
The built-in video output control module enables the QM-RMCRX to select
video outputs, compensate for signal attenuation, and save and recall up to 100
skew presets for transmitting nodes.
The video module selects the video source, sends it to the proper output, saves
and recalls skew presets, and adjusts peaking and boost.
Detail View of Video Output Control
The < QM_Link > signal is an indicator that the transmitter connection is present
and valid. This digital signal will indicate a failure if, for example, the QM cable
is disconnected or damaged, since both audio and video are transmitted on the
same CAT5 cable (on different wire pairs) between the transmitter and receiver.
The < VideoInputSelect > analog signal enables the video output and selects the
video source as follows:
1 = RGB video
2 = Composite video
3 = S-video
A value of 0 denotes no current video source and disables all video outputs. No
other values are valid for <
VideoInputSelect >. The < VideoInputSelect_F >
feedback signal indicates the current video source.
The QM-RMCRX provides integrated skew compensation, which corrects
problems such as color separation that can occur when CAT5 cables have
40
•
QuickMedia™ Receiver/Processor: QM-RMCRX Operations Guide - DOC. 6236A