Crestron QM-FTCC-TPS4, Руководство по эксплуатации и установке

Страница: 20 / 52

FlipTop Touchpanel Computer Center Crestron QM-FTCC-TPS4
A 1/16” Allen (hexhead) wrench is required for this procedure.
1. Remove and retain the four #4 buttonhead screws securing the bezel to the
flip-top cover. (Refer to the following illustration.)
2. Carefully lift the bezel from the unit.
3. Place the engraved bezel in position on the unit and attach it using the four
screws removed in step one.
Engraved Bezel Installation
#4 Buttonhead
Screws
Cable Management Plate
The QM-FTCC-TPS4 is shipped with a cable management plate and associated parts
to provide a pullout cable solution for the computer input and LAN passthrough
cables. The parts include a three-hole plate, grommets, and two 6-foot cables
(computer and computer audio). Refer to the following table.
Parts Supplied for the Optional Cable Management Plate
PART DESCRIPTION QUANTITY
Small Cable Bushing, 5/16 inch ID, 0.5 inch OD 2
Large cable Bushing, 0.55 inch ID, 0.80 inch OD 1
Cable Support Plate 1
Tie Wrap 3
Computer Cable, VGA to VGA, 6 ft long 1
Computer Audio Cable, 3.5 mm Stereo, 6 ft long 1
Screws, 4-40 x ¼ , black, Phillips head 4
16
•
FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 Operations & Installation Guide - DOC. 6393