Crestron MT-500C, Руководство по эксплуатации

Страница: 9 / 28

Crestron MT-500C MiniTouch Color RF Wireless Handheld
RS-232 Cable
RS-232 Cable Pinouts
Pin 5 (Sleeve)
Pin 1
Pin 2 (Tip)
Pin 3 (Ring)
Tip
Ring
Sleeve
Female DB9
Pin 2 - Transmit
Pin 3 - Receive
Sleeve - Ground
Industry Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Setup
This section contains hardware installation and setup instructions.
Installing the Battery Pack
1. On back of MT-500C, press the latch on the battery cover and remove it
(refer to illustrations below).
Battery Cover Removal
2. Place the battery pack in the battery compartment (refer to illustration on
the next page).
3. Connect the battery pack cable to the battery connector.
Operations Guide – DOC. 6101 MiniTouch Color RF Wireless Handheld
•
5