Crestron MC2E, Руководство по эксплуатации

Страница: 30 / 48

2-Series Professional Media Controller Crestron MC2E
System View of MC2E
Slot 1: C2Net-Device
The C2Net-Device slot enables the MC2E to control up to 252 Cresnet devices. Each
Cresnet device is assigned a unique identifier called a Net ID, which is a
hexadecimal value ranging from 03 to FE.
To view the list of supported devices, expand the control system in the bottom pane
of
System Views and double-click the C2Net-Device slot, or right-click and select
Add Item from the submenu. Supported devices include network control modules,
lighting modules and a variety of Crestron wired touchpanels.
To add a device to the system expand the C2 Net-Device slot and double-click the
desired Net ID, or right click and select
Add Item from the submenu. Then select the
device you want to add. Alternatively, you can drag the device from the Cresnet
Modules folder onto the Net ID.
In Program Manager, the C2Net-Device symbol contains no signals; to program a
controlled Cresnet device, expand the C2Net-Device symbol in
Program View . Then
drag the device to Detail View .
Slot 2: C2I-MC2-IR4
The MC2E provides four output IR ports (A through D) that enable serial
communication in a variety of formats, including infrared and one-way RS-232. Of
course, different devices may require additional receiving equipment, cables,
adapters, etc.
To add an IR device to the system, drag the device driver from the Crestron or User
IR Database to a C2I-MC2-IR4 port.
To add an RS-232 device, drag the C2IR one-way serial driver from the Serial
Drivers folder to a C2I-MC2-IR4 port. Alternatively, you can double-click a
C2I-MC2-IR4 port and select the C2IR one-way serial driver (or right-click and
select
Add Item from the submenu).
Next, double-click the serial driver to specify the communication settings that are
required by the device. These settings define the protocol that the controlled serial
device expects, and include the speed of data transmission (baud rate), error
checking (parity), and the number of data bits and stop bits. The exact protocol is
described in the manufacturer's documentation.
NOTE: The C2IR serial driver, being one way, does not provide hardware or
software handshaking.
NOTE: A port can be used for either IR or RS-232 communication, not both.
26
•
2-Series Professional Media Controller: MC2E Operations Guide - DOC. 6142