Crestron Isys TPS-4000L, Руководство по эксплуатации

Страница: 47 / 52

Crestron Isys
®
TPS-4000L 10.4” Lectern/Wall Mount Touchpanel
Appendix: Configuring the RS-232 Port for Use
To configure the RS-232 port of the TPS-4000L, a local PC that contains a Crestron
Viewport is required. The Viewport is one of the development tools that is part of
Crestron SIMPL Windows or VT Pro-e software.
Obtaining Communications
Refer to “Communication Settings” on page 34 for detailed instructions on
connecting a PC to the touchpanel.
Configuration Options
There are several RS-232 communication options (at the time of this printing, these
were available):
•
CONSOLE – console active on RS-232 port. Use to load programs,
firmware, or to set configuration. This is the default. Use this
configuration if no other option is appropriate.
•
TOUCHOUT – touchscreen output sent to RS-232 port. Use for PC
mouse control or Telestrator output. Directly connect computer or
Telestrator box to RS-232 port on TPS-4000L (i.e., touch screen
output). For example, use when an RGB window with tablet overlay on
the TPS panel acts as a mouse controller for a PC. In this case, use the
latest version of the Crestron Serial Mouse Control Driver, which can
be downloaded from the Downloads | Software Updates section of the
Crestron website (
www.crestron.com) . Another use is with the
Pointmaker

telestrator. For details, refer to the Telestrator Integration
Guide, which can be downloaded from the Downloads | Product
Manuals section of the Crestron website (
www.crestron.com) .
•
EXT_TOUCH – RS-232 port used for external touch screen input (i.e.,
SMART Matisse Overlay or Microtouch Display).
RS-232 Port Configuration
After establishing communication with the control system, the RS-232 can now be
configured for communication with an option. Complete the following steps in the
order provided.
1. From the Viewport, select Remote | Remote Console | Connect .
2. From the “TPS>” prompt, enter the following command:
rs232 ?
3. The TPS-4000L responds with the following:
RS232MODE [CONSOLE|CONTROL|RF|TOUCHOUT|MOUSE|EXT_TOUCH]
CONSOLE – console active on RS232 port
TOUCHOUT – touchscreen output sent to RS232 port.
EXT_TOUCH – rs232 port used for ext. touchscreen input
No parameter – display current setting
Operations Guide – DOC. 6301 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L
•
43