Crestron Isys TPS-4000, Руководство по эксплуатации

Страница: 18 / 48

10.4 Inch Tilt Touchpanel Crestron Isys
®
TPS-4000
Diagnostics Menu
DIAGNOSTICS MENU
The Diagnostics button from the MAIN MENU should only be used under
supervision from a Crestron customer service representative during telephone
support. The options available from the DIAGNOSTICS MENU, shown to the left,
are numeric in nature and their interpretation is beyond the scope of this manual.
Hardware Hookup
Make the necessary connections as called out in the following illustration. Refer to
“Network Wiring” on page 8 before attaching the NET or NET/VIDEO connector.
Apply power after all connections have been made. For additional information on
connecting the touchpanel to the interface module, refer to the latest revision of the
TPS-IMPC Operations Guide (Doc. 6162) which can be downloaded from the
Crestron website (www.crestron.com).
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
Hardware Connections for the TPS-4000
AUDIO INPUT / MICROPHONE OUTPUT:
FROM DIFFERENTIAL/SINGLE ENDED AUDIO SOURCES;
PROVIDES LINE-LEVEL DIFFERENTIAL OUTPUT
NET/VIDEO:
TO CRESNET VIA TPS-IMPC
/ INPUTS COMPOSITE OR S-VIDEO
RS-232:
TO PC OR ANY RS-232 DEVICE
HEADPHONES:
FOR WAV AND LINE ONLY
HEADPHONES
Connect this standard mini phone jack (12 mW, 32 ohms load) to the plug of an
external headphone set, not supplied.
AUDIO
This 8-pin, RJ-45 connector mates to either the TPS-IMPC or TPS-IMW interface
module with a supplied cable and provides differential/single ended audio input and
output. It also produces line level differential output. Description of the pinouts is
shown in the following table.
14
•
10.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-4000 Operations Guide - DOC. 6268