iMedia Wall Plate Control Panel
Crestron
IM-WCVP
20-bit, 48 kHz resolution. Control and power signals are also contained
on the same wire, eliminating the need for separate control or power
cables.
* For iMedia use CresCAT-IM cable, or quality CAT5e/CAT6 cable having a
maximum delay skew of 15ns per 100m.
2-Piece Wall Plate Multimedia Interface
The IM-WCCV-S is an iMedia (IM) transmitter featuring separate wall
plates for interface and control. The interface panel (IM-WCVI) is
designed to install in a standard 2-gang electrical box, providing video,
RGB, and stereo audio inputs for connection to the output of a computer
or AV source. The control panel (IM-WCVP) is a separate 1-gang wall
plate, which may be installed up to 40 feet from the interface panel.
Installing wiring for the IM-WCCV-S is extremely simple using
CRESCAT-IM cable. Up to three IM-WCCV-S's, or other IM
transmitters, may be installed as part of a complete system to provide
multiple input locations within the room.
Foolproof Operation
Every iMedia system is easy and intuitive to use. A simple press of the
VIDEO
or
PC
buttons on the control panel selects the appropriate input,
turns on the projector (or plasma, etc.), lowers the screen or lift, and
routes all the signals where they need to go. The volume control affords
easy adjustment of the audio level, and the entire system can be turned
off at any time by simply holding down either button for five seconds.
For systems having more than one IM transmitter, selecting an input at a
given input location overrides the previously selected input at any other
location. The audio level for each input location is controlled individually
by its respective volume control.
2
•
iMedia Wall Plate Control Panel: IM-WCVP Operations & Installation Guide – DOC. 6489
