Crestron
IM-WCVP
iMedia Wall Plate Control Panel
iMedia Wall Plate Computer
Center with Video Control Panel:
IM-WCVP
Introduction
Features and Functions
•
Control panel for use with the IM-WCVI iMedia Wall Plate
Computer Center with Video Interface
1
•
Connects to IM-WCVI to create IM-WCCV-S Wall Plate
Computer Center with Video using CresCAT™-IM iMedia cable
or other high quality CAT5 cable (up to 40 feet)
2
•
Controls volume, source selection, and power for iMedia systems
•
Mounts in a standard, 2½ inch deep, single-gang electrical box
1. The IM-WCVP is part of the IM-WCCV-S. It must be used with the IM-WCVI.
2. For more information on CresCAT-IM cable, refer to the latest version of the
IM-WCVI guide (Doc. 6488), available from the Crestron website
(www.crestron.com/manuals).
The iMedia Transport
The iMedia transport utilizes a single CAT5e* type cable to transmit
computer RGB, video, and stereo audio signals to a single projector or
plasma display. A typical XGA signal (1024 X 768 pixels at 60Hz) can
be transmitted up to 84 feet using iMedia, while higher resolutions up to
1600 x 1200 can be handled over shorter distances. Composite video
signals can be transmitted up to 218 feet. Audio is transmitted digitally at
Operations & Installation Guide – DOC. 6489 iMedia Wall Plate Control Panel: IM-WCVP
•
1
