Crestron DMPS-100 Скачать руководство пользователя страница 10

Страница: 10 / 76

DigitalMedia Presentation Systems

Crestron

DMPS-100/200/300-C/300-C-AEC

•

DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC

Operations Guide – DOC. 7219D

The DMPS-100/200/300-C supports 5Play™, the feature set of HDBaseT that

converges uncompressed full HD digital video, audio, Ethernet*, power and control

signals through a single CAT5e or CAT6 cable over distances up to 328 ft (100m).

Multi-Channel Microphone Mixer

For a complete presentation or conferencing solution, the DMPS-100/200/300-C

includes built-in mixing and processing for multiple microphones (two for

DMPS-100-C, four for DMPS-200-C, six for DMPS-300-C/300-C-AEC). Each mic

input provides selectable mic or line level with 40 dB gain adjustment, switchable

48V phantom power, fully-adjustable gating, compression, limiting, and 4-band EQ.

Sophisticated matrix mixing allows for a completely different stereo mix of all

microphones at each of the DMPS-100/200/300-C system’s outputs.

Acoustic Echo Cancellation (DMPS-300-C-AEC Only)

High-performance adaptive AEC on each mic input enables the DMPS-300-C-AEC

to be connected directly to audio and video codecs to form a complete

teleconferencing system solution. Low-latency, full-bandwidth performance affords

highly-effective echo cancellation with natural sound quality. AEC is employed

independently per microphone, with a fast convergence rate of 80 dB per second and

tail lengths up to 200 ms, allowing the DMPS-300-C-AEC to handle any typical

small to medium sized room with ease.
Expanded signal routing and audio processing in the DMPS-300-C-AEC allows one

or two codecs to be connected to any of the seven source inputs, and either (or both)

of the aux outputs. Dual codec support allows both codecs to be used simultaneously,

even allowing the signal from one codec to be fed to the other for a fully inclusive

teleconferencing experience. Plus, any local presentation source can be mixed with

the microphones and routed to the codecs, allowing far end participants to experience

the full presentation without any distracting echo

Professional Audio DSP

Each analog audio output on the DMPS-100/200/300-C includes its own digital

signal processor, allowing each output to be optimized to feed a power amplifier,

codec, recorder, or assistive listening system. In addition to real-time adjustable

volume, bass, treble, and mute controls, each DSP provides 10-band graphic

equalization, 2-band parametric equalization, and 85 ms speaker delay adjustment.

Hardware relay muting on each output helps prevent "thumping" on power up.
An additional dedicated DSP is included to process the AEC reference signal inside

the DMPS-300-C-AEC, allowing its EQ and volume level to be set to track that of

the main program output feeding the room speakers. In some situations, this can

reduce the demand on the AEC’s adaptive filter for even more transparent

performance.

Built-in Amplifier

Its built-in 40 watt amplifier allows the DMPS-100/200/300-C to directly drive a pair

of stereo speakers, or a string of 70 or 100 volt ceiling speakers. Fed by the main

"Program" output, the internal amplifier benefits fully from the onboard DSP. For

larger applications, Crestron AMP-Series power amplifiers may be added, providing

a complete solution for driving separate program and speech speakers, or any

multi-zone loudspeaker system.

* Supplying power over DM (PoDM) requires external power pack, sold separately.

Содержание DMPS-100













































































Результаты поиска

Содержание DMPS-100

Отзывы:

Бренды по названию

Популярные бренды

Crestron DMPS-100, Руководство по эксплуатации

Результаты поиска

Содержание DMPS-100

Отзывы:

Бренды по названию

Популярные бренды