Crestron DA-1700CW, Руководство по эксплуатации и установке

Страница: 16 / 24

Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW
exists in the program. Always ensure that the network device Net IDs set via
Viewport match the ones in your SIMPL Windows program.
BB/DA-1700CW Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron control system
by assigning signals to symbols. The graphic below shows the BB/DA-1700CW
symbol in the
Detail View of the Programming Manager.
Detail View of the BB/DA-1700CW Symbol in SIMPL Windows’ Programming Manager
NOTE: All signals listed in the tables below and on the next page are DIGITAL
signals unless noted otherwise. A digital signal can be high (logic level of 1), low
(logic level of 0), and also have rising edge (when it goes from low to high) and
falling edge (from high to low) transitions.
BB/DA-1700CW Symbol Input Description
INPUT FUNCTION(S)
UNLATCH
(Unlock in earlier
versions of SIMPL
Windows.)
Edge sensitive. Unlatches the back box for 5-seconds when the
edge of the signal is received. After the 5-seconds has expired,
the latch engages. The back box may not be unlatched for
1-second after the latch is engaged.
BB/DA-1700CW Symbol Output Descriptions
OUTPUTS FUNCTION(S)
UNLATCHED
1 when the latch is open, 0 when the latch is closed.
(Unlock-FB in earlier
versions of SIMPL
Windows.)
PANELPRESENT
1 when the touchpanel is docked,
0 when the touchpanel is not docked.
CHARGING
1 when the touchpanel is docked and the ST-BTP is charging,
0 otherwise (i.e. done charging, touchpanel not docked).
CHARGEDONE 1 when the touchpanel is docked and charging is complete,
0 otherwise (i.e. still charging, touchpanel not present).
CHARGEFAULT 1
when there is a charge fault (i.e. hardware problem with the
touchpanel, poor contact with the charger, a network voltage
problem, etc.),
0
when no fault is present.
12
•
Docking Assembly for STX-1700CW/CXPW: DA-1700CW Operations and Installation Guide - DOC. 6104A