Crestron DA-1700CW, Руководство по эксплуатации и установке

Страница: 19 / 24

Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW
1. Refer to the diagram below. At top-center of the front panel, remove the
manual unlatch access plug from the access hole.
Remove Access Hole Plug
2. As shown below, insert a long-reach screwdriver into the access hole at a
downward angle (approximately 10
o
) until the tip of the screwdriver
contacts the manual unlatch tab.
Insert Screwdriver
3. As shown below, lower the handle of the screwdriver until the touchpanel
unlatches (handle of screwdriver will be approximately level and
touchpanel will snap outward slightly).
Lower Screwdriver Handle
Operations and Installation Guide - DOC. 6104A Docking Assembly for STX-1700CW/CXPW: DA-1700CW
•
15