Cresnet QMT® Shade Motor with the Power and Control Coming from the Same
Source
Cresnet QMT Shade Motor with the Power and Control Coming from Separate
Sources
Wire the inNET EX® Wireless QMT Shade Motor
Motor Programming
The Crestron® digital CSM(I)-QMTDC shade motors are programmed
locally using the buttons on the motor. The information in this guide
serves as a detailed programming overview of the Crestron CSM
(I)-QMTDC shade motors.
NOTE:
The procedures described in this document can also be
performed remotely using a control system. The timeout and LED
indicators are the same as described in this document.
Controls and Indicators
The Crestron CSM(I)-QMTDC shade motors have UP, SET, and DN
(down) push buttons that are used to program the shade. The shade
motors have a multicolor LED that lights red, amber, green, blue, or white
to provide confirmation, operating mode, and error state feedback. The
UP button is located closest to the LED, the SET button is the second
button from the LED, and the DN button is the third button from the
LED.
Crestron CSM-QMTDC Motor Multicolor LED and Push Button Orientation
12
CSA-DECOR5 Series
Quick Start
Shade Motor Bracket Installation and Motor Programming
