Touchpanel with Dual Joysticks
Crestron
CPC-2000A
(Doc. 5682). Pinout notations are provided on these documents. The wiring
documents can be obtained from the Downloads page (CABLES and MANUALS
Libraries) of the Crestron website (
. Search for the
CRESNET.PDF and MODULAR.PDF files.
Refer to the hookup diagram below for proper connections of the
CPC-2000A to the control system. Other than making the power connection last,
complete the connection in any order.
Control System Hookup Connections for the CPC-2000A
BACK PANEL VIEW OF CPC-2000A
THIS CONNECTION IS ONLY REQUIRED
WHEN LOADING YOUR VT PRO-E
PROJECT TO THE CPC-2000A OR
WHEN SETTING THE NET ID OF
THE JOYSTICK.
PC
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
CRESTRON
CN-RJ11
NOTE:
SERIAL
PORT
CONTROL
SYSTEM
NOTE:
Identity Code
Each device and user interface within the network requires a unique identity code
(NET ID). These codes are recognized by a two-digit hexadecimal number from 03
to FE. The NET ID of the unit must match an identity code specified in the SIMPL
Windows program.
The CPC-2000A possesses two distinct identity codes; one code is for the
touchpanel and the other is for the sensitivity adjustment knobs and joysticks which
are treated as a network device. The NET ID of the touchpanel component is set to
03. Refer to “Interface Menu” on page 9 for instructions on setting the touchpanel
component of the unit’s identity code. For the knob/joystick component, the NET ID
has been factory set to 30H, but may be changed from the PC via VT Pro-e or
SIMPL Windows.
The method for changing the unit’s NET ID is identical regardless of the software
chosen. Attach the CPC-2000A to the control system (verify that the software is
running) and complete the following steps to change the NET ID.
1. Disconnect all network devices from the control system, except for the
one CPC-2000A that needs to have its NET ID changed.
6
•
Touchpanel with Dual Joysticks: CPC-2000A
Operations Guide - DOC. 5801A
