CRESTRON
20
••
Series 3500 Touchpanels
Operations Guide - DOC. 8108B
Series 3500 Troubleshooting (Continued)
TROUBLE
POSSIBLE
CAUSE(S)
CORRECTIVE ACTION
Unexpected
response
from
touchpanel.
Touchpanel is
incorrectly calibrated.
Enter SETUP MODE and recalibrate.
Touchpanel
exhibits
slow
Compressed graphics
take time to
decompress.
If there are no memory problems,
decompressed graphics decrease the drawing
time of panel pages.
operation.
If there are no memory problems, convert 16
color graphics to 256 color to decrease the
drawing time of panel pages.
Further Inquiries
If after reviewing this Operations Guide for the Series 3500 Touchpanels, you
cannot locate specific information or have questions, please take advantage of
Crestron's award winning technical support team by calling:
•
In the US and Canada, call Crestron’s corporate headquarterrs at 1-
888-CRESTRON [1-888-273-7876] or 1-201-767-3400.
•
In Europe, call Crestron International at +32.15.730.974.
•
In Asia, call Crestron Asia at +852.2341.2016.
•
In Latin America, call +525.574.15.90.
For local support from exclusive Crestron factory-trained personnel call:
•
In Australia, call Soundcorp at +613.941.61066.
•
In New Zealand, call Amber Technologies at +649.410.8382.
Syntax
The following syntax codes are provided for compatibility purposes only. It is a
sample of SIMPL-C programming for the block diagram example illustrated in
“Programming” on page 15.
NET.ID <03 to FE>: CTP-3000
i1 = <relay1>
\i1 refers to join# of touchpanel button
o1 = <relay1_fb>
“ = “ “
i4 = <relay4>
o4 =<relay4_fb>
