Crestron CNXRMCLV, Руководство по эксплуатации

Страница: 6 / 40

Room Solution Box with Local Video Crestron CNXRMCLV
2
•
Room Solution Box with Local Video: CNXRMCLV Operations Guide - DOC. 8161A
Specifications
Detailed specifications for the CNXRMCLV are listed in the following table.
CNXRMCLV Specifications
SPECIFICATION DETAILS
Power Requirements 12 Watts (0.5 Amp @ 24 VDC)
Default Net ID 42
Head end video inputs RJ-45 CAT5 balanced video input (1-4), 100 Ohm
impedance, with cable length compensation on three
of the four signals.
All four inputs (5 – 8) have video sensor capability
(0.25 Vp-p)
Local video source inputs 4 RCA connectors labeled 5-8 with built-in 75 Ohm
termination.
Local video outputs 8 RCA connectors labeled A-H, 75 Ohm impedance
Head End video outputs RJ-45 for balanced video outputs E-H
Local audio inputs 6 RCA connectors for 3 line-level stereo sources A-C
Local audio outputs 4 RCA connectors for 2 line-level stereo outputs:
Primary (adjustable) and Record (fixed)
Audio specifications Maximum input level: 3.2VRMS
Maximum output level: 2.5VRMS
Impedance – Unbalanced 10K input; 10 Ohm
output
Impedance – Balanced
600 Ohm input/output
THD: <0.02%
S/N ratio: >100dB
Gain range: -80dB to +20dB
Volume steps: 100 (1dB/step)
Mute: 100dB
Bass control: ±12dB
Treble: ±12dB
RS-232 communication RJ-11 connector
The RS-232 port can be used for the console as well
as RS-232-equipped device communication.
The RS-232 port supports data rates up to 115K baud
and RTS/CTS hardware handshaking.
IR input 1 Mini stereo phone jack–(power, ground, signal)
IR output 4 Mini mono phone jacks–(ground, signal)
Sensor input Mini Cresnet 2 pin connector accepts power status
feedback from the optional CNXRMCS current sensor
(available separately).
Indicators PWR (Power), NET and SETUP LEDs
CNXRMCLV Firmware CNXRMCLV.51314r.upz or later
Control System Update Files
1, 2, 3
2-Series Control System
CNMSX-AV/PRO
CNRACKX/-DP
Version 3.015.CUZ or later
Version 5.13.12X.UPZ or later
Version 5.12.63W.UPZ or later
Environmental Temperature 41° to 122°F (5° to 50°C)
Humidity 10% to 90% RH (non-condensing)
Dimensions Height: 1.94 in (4.93 cm)
Width:
11.60 in (29.46 cm)
Depth: 7.65 in (19.43 cm)
Weight 2.27 lb (1.02 kg)
1. The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com). Refer to NOTE on the next page.
2. Crestron 2-Series control systems include the AV2, CP2, CP2E, MP2, MP2E, PAC2, PRO2, and
RACK2.
3. CNX updater files are required for either CNMSX-AV/PRO or CNXRACKX/-DP. Filenames for
CNX update files have a UPZ extension. To avoid program problems, make certain you are using the
update file with the correct suffix letter (e.g., W or X).